How to Operate a Fire Extinguisher Using the PASS Method

What does the PASS method stand for in operating a fire extinguisher? The PASS method stands for: A) Pull the pin, Aim at the base of the fire, Squeeze the handle, Sweep back and forth at the base.

When it comes to operating a fire extinguisher effectively, the PASS method is a crucial acronym to remember. Here's a detailed explanation of each step:

Pull the pin:

This step is essential as it releases the lock mechanism of the fire extinguisher, allowing you to discharge the extinguishing agent.

Aim at the base of the fire:

It is crucial to direct the extinguisher's nozzle at the base of the flames. This is where the fuel source is located, and targeting this area helps to cut off the fire's source of energy.

Squeeze the handle:

By squeezing the handle of the fire extinguisher, you activate the mechanism that releases the extinguishing agent. Make sure to do this firmly and confidently.

Sweep back and forth at the base:

Once the extinguishing agent is dispensed, sweep the nozzle of the extinguisher from side to side at the base of the fire. This sweeping motion helps to ensure that the fire is completely smothered and extinguished.

By following the PASS method when using a fire extinguisher, you can effectively combat small fires and prevent them from spreading. Remember to always prioritize your safety and evacuate the area if the fire becomes uncontrollable.

← What skills are necessary for effective communication Eating disorder onset in late adolescence and early adulthood →