Matching Cisco Network Device Configuration Modes and Commands

Can you match the configuration modes with the corresponding commands available in each mode?

1) R1(config-line)#
2) R1#
3) R1(config-router)#
4) R1>
5) R1(config)#

Matching Configuration Modes with Commands:

1) R1(config-line)# - Line Configuration Mode
2) R1# - Privileged EXEC Mode
3) R1(config-router)# - Router Configuration Mode
4) R1> - User EXEC Mode
5) R1(config)# - Global Configuration Mode

In the world of Cisco networking devices, understanding different configuration modes and their corresponding commands is crucial for effective network management. Each configuration mode offers access to specific commands and functionalities for configuring and maintaining the device.

Line Configuration Mode:

In Line Configuration Mode, denoted by the prompt R1(config-line)#, you can configure settings related to console ports, SSH, Telnet, or AUX interfaces. This mode allows you to set specific parameters for these line interfaces.

Privileged EXEC Mode:

When you see the prompt R1#, you are in the Privileged EXEC Mode. This mode provides access to view and modify the entire configuration of the router. It allows you to execute privileged commands and make changes to the device settings.

Router Configuration Mode:

R1(config-router)# signifies that you are in the Router Configuration Mode. This mode is used for configuring routing protocols on the router, such as OSPF, EIGRP, and BGP. It allows you to set up routing tables and control the routing behavior of the device.

User EXEC Mode:

If you encounter the prompt R1>, you are in the User EXEC Mode. This mode offers access to a limited set of basic monitoring commands that allow users to check the device's status and perform basic troubleshooting tasks.

Global Configuration Mode:

Lastly, R1(config)# indicates the Global Configuration Mode. In this mode, you can make changes that affect the router as a whole. It allows you to configure settings that apply globally to the entire device, such as setting hostnames and IP addresses.

By understanding these different configuration modes and their associated commands, network administrators can effectively manage and configure Cisco networking devices to ensure optimal performance and security.